Equipped with Intellisense Technology (gated automatic gain control). Provides manual and remote ON/OFF control in multi-station switching circuits when used in conjunction with one or more Cat. No. 6294 Remote Switches. The 6293 can be set to any of 256 DHC address codes to switch incandescent, inductive or resistive loads where dimming is not required. Responds to ON, OFF, ALL LIGHTS ON/ALL OFF commands. Wires easily into standard wall box using terminal screws. Neutral Connection Required. Pilot light is ON when switch is ON. Code wheels are located beneath rocker plate. For proper operation, the total length of traveler wire between Multi-Location Switch and Remote should not exceed 90 feet. Packed with Ivory and White Rocker and Frame. Kits for other colors must be purchased separately. Use with Leviton DPSPE-112 Power Extender to extend 120V load capacity to 2000W/2000VA for incandescent, magnetic low-voltage and 120 Advance Mark X fluorescent dimming ballasts. Use with Leviton DPSPE-212 Power Extender to extend 120V load capacity to 2000W/2000VA for Mark V11 and OSRAM Sylvania Quicktronic ® Helios fluorescent dimming ballasts. Rated: 15A 120V AC 60Hz Incandescent, Inductive or Resistive