FACE FRAMES (Oak)Mortise and tenon, glued and fastened Horizontal rails 3/4" x 1-1/2" kiln dried hardwood Vertical stiles 3/4" x 1-1/2" kiln dried hardwood CABINET ENDSExposed ends 1/2" 45# premium particle board All wall cabinet ends rabbeted to receive tops, bottoms Base cabinet ends are rabbeted to receive floor and intermediate shelf CABINET DOORS ANDDRAWER HEADS 5/8" Grandlam Panel on Woodgrain, White, or Almond laminate. A sandwich of melamine resin impregnated paper, on a Type 1 B2 mat-formed 45# density industrial grade particle board core, bonded together using heat and pressure. Edges banded with PVC, applied with hot melt system. DRAWERS7/16" fiberboard basecoated, printed, topcoated (4 sides) Bottom 1/8" hardboard, matches interior Sides rabbet joint machined all four corners All joints glued and power nailed WALL CABINET AND BASE CABINET SHELVING Shelving 5/8" premium particle board with front edge smooth, fully adjustable in all wall cabinets Due to plumbing considerations, there is no shelving in sink bases or vanities Base shelf is half depthWALL CABINETS TOP AND BOTTOM Wall cabinets not less than 1/2" 45# particle board Let into sides and face frame All joints glued and power nailed BASE CABINET FLOORSBase cabinet not less than 1/2" 45# particle board Let into sides and face frame All joints glued and power nailed Back of floor set on supporting member, glued and fastened HARDWARESelf-Closing, 110 degree opening concealed hinges. Drawer slides - side mount, 75 Ib load capacity, epoxy coated, self-closingCABINET BACKSAll back are 1/8" standard hardboard
